Monolithic Power Systems (MPS) MP6539B 100V 3-Phase BLDC Motor Pre-Driver

Author : Monolithicpowersystems Published Time : 2019-09-16
Monolithic Power Systems (MPS) MP6539B 100V 3-Phase BLDC Motor Pre-Driver is capable of driving three half-bridges consisting of six N-channel power MOSFETs up to 100V. The MP6539B uses a bootstrap capacitor to generate a supply voltage for the high-side MOSFET driver. An internal charge pump maintains the high-side gate drive if the output is held high for an extended amount of time. Internal safety features include shoot-through protection, adjustable dead-time control, under-voltage lockout (UVLO), and thermal shutdown. The MP6539B is similar to the MP6539. It does not implement auto bootstrap charging, does not include over-current protection, and is powered only from the VDD pin (VIN and LDO have been removed). The MP6539B is available in TSSOP-28 (9.7mmx6.4mm) and QFN-28 (4mmx5mm) packages with an exposed thermal pad.

Features

Supports 100V Operation120V VBST Maximum VoltageIntegrated Current-Sense AmplifierLow-Power Sleep Mode for Battery-Powered ApplicationsAdjustable Dead-Time Control to Prevent Shoot-Through

Applications

Three-Phase Brushless DC Motors and Permanent Magnet Synchronous Motors
Monolithicpowersystems Newest

Monolithic Power Systems (MPS) eMotion System™ Smart Motor Module Evaluation Kits are a family of fully integrated motor solutions for servo motor applications.

Date: 2019-09-24

Monolithic Power Systems (MPS) MP2330x Synchronous Buck Converters are fully integrated, high-frequency, step-down, and switch-mode converters with internal power MOSFETs.

Date: 2019-09-18

Monolithic Power Systems (MPS) MPS4425A Synchronous Step-Down LED Driver is a high-frequency, synchronous, rectified, step-down, switch-mode white LED driver with built-in power MOSFETs.

Date: 2019-09-17

Monolithic Power Systems (MPS) EV8864-Q-00A Evaluation Board is used for demonstrating the performance of the MP8864, a highly integrated and high frequency synchronous step-down switcher.

Date: 2019-09-17

Monolithic Power Systems (MPS) MP6539B 100V 3-Phase BLDC Motor Pre-Driver is capable of driving three half-bridges consisting of six N-channel power MOSFETs up to 100V.

Date: 2019-09-16

Monolithic Power Systems (MPS) MP2152 Sync Step-Down Converter offers 2A of continuous output current from a 2.5V to 5.5V input voltage with excellent load and line regulation.

Date: 2019-09-12

Monolithic Power Systems (MPS) MP5030D USB Current-Limit Switch integrates charging port identification circuitry.

Date: 2019-09-11

Monolithic Power Systems (MPS) MP6500A 35V, 2.5A, Stepper Motor Driver has a built-in translator and current regulation.

Date: 2019-09-11